Cycle Nano Technology–based Heat Transfer Solution is a next-generation fluid engineered to deliver High Thermal Conductivity and High Heat Transfer Performance. Designed for radiators, central heating systems, combi boilers, heat exchangers, and all heating applications, it provides HIGH ENERGY SAVINGS AND COMFORT, bringing modern technology into residential and commercial environments with its high surface-area formulation.
This solution not only enables superior heat transfer but also significantly reduces carbon emissions, prevents corrosion, remains stable, reusable, environmentally friendly, and provides high economic efficiency.
Density : 1.12 – 1.16 g/cm3 (+0.02)
Viscosity : Low 67 – 70 cp
Freezing Point : -40°C
Service Life : 3 Years (in environments without sunlight)
pH Level : Stable 6.8 – 7.4
Appearance : Black/Grey semi-transparent, homogeneous fluid
Provides faster heating. (Does not freeze at -40°C)
Delivers higher heat efficiency with lower energy consumption.
Significantly reduces sediment formation.
Controls and protects internal system surfaces.
Offers approximately 50% fuel savings for heating
(with accurate volume calculation).
Provides 20% or more additional heat-carrying capacity compared to tap water.
Does not cause scaling; forms a protective barrier against limescale formation.
Increases heat transfer capacity.
Ensures high thermal conductivity.
Prevents corrosion and reduces carbon emissions.
Lower temperatures reduce sludge, sediment, and bacterial formation.
Eliminates the need for antifreeze in cooled pipeline fibers.
Compatible with all systems; low viscosity.
Odorless.
Compatible with Cast Iron – Copper – Aluminum Panel – Steel/Metal radiator systems.
Does not harm central heating boilers, internal installations, or equipment.
On the contrary, it protects them, extends their service life, and reduces
maintenance and replacement requirements.
(Globally approved technical standard.)
Provides a eutectic mixture.
Eutectic mixture: A combination of two or more biodegradable components.
This describes an ionic liquid mixture characterized by these properties.
With Cycle Nano Heat Transfer Solution, heat spreads faster and radiator surfaces warm evenly and consistently. This allows the system to reach target temperatures more quickly, creating ideal conditions for HIGH ENERGY SAVINGS.
Building Type : 100 m² apartment (standard insulation)
Heating System : Combi boiler, 8 radiators (75 m² surface area)
Target Savings : 42% – 56% energy reduction
Outdoor Temperature : -40°C
Target Indoor Temperature: +22°C
Boiler Outlet Temperature: +70°C
Comparison with Traditional Solution (Water + Antifreeze)
| Feature | Classic Antifreeze | Cycle Nano Heat Transfer Solution |
|---|---|---|
| Thermal Conductivity (W/m K) | 0.38 | 0.61 – 0.72 |
| Viscosity (25°C, cP) | 58 | 65 – 70 |
| Heat Capacity (kJ/kg K) | 3 | 3.6 – 3.9 |
| Radiator Temperature Difference | 7.5°C | 4.2°C |
| Average Energy Savings | 28% | 42% – 56% |
Maximum Achievable Room Temperature
Classic Antifreeze: 19.8°C
Cycle Nano Solution: 22.4°C
ENERGY IN THE UNIVERSE CAN NEITHER BE CREATED NOR DESTROYED —
IT ONLY CHANGES FORM